JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip route-type

ip route-type

Description: 

Specifies whether BGP, IS-IS, OSPF, or RIP routes are available only for unicast forwarding, only for multicast reverse path forwarding checks, or for both. The no version restores the default value, unicast for BGP or both for IS-IS, OSPF, and RIP.

Syntax: 

For BGP:

ip route-type [ unicast | both ]

no ip route-type

For IS-IS, OSPF, and RIP:

ip route-type [ unicast | multicast | both ]

no ip route-type

• unicast—Specifies that routes for the protocol are available only for unicast forwarding
• multicast—Specifies that routes for the protocol are available only for multicast route path forwarding checks; this option is not available for BGP
• both—Specifies that routes for the protocol are available for both unicast forwarding and multicast route path forwarding checks

Mode(s): 

Address Family Configuration (RIP), Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.