JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip pim spt-threshold

ip pim spt-threshold

Description: 

Specifies the network configuration that PIM sparse mode uses when a source starts sending multicast messages. The no version restores the default value, 0.

Syntax: 

[ no ] ip pim spt-threshold { 0 | nonzero_integer | infinity } [ group-list ipAccessList ]

• 0—Configures PIM sparse mode to switch to an SPT when a source begins to send multicast messages
• nonzero_integer—Integer in the range 1–4294967294; prevents PIM sparse mode from switching from a shared tree to an SPT
• infinity—Prevents PIM sparse mode from switching from a shared tree to an SPT
• ipAccessList—Name of the IP access list that specifies the groups to which the threshold applies

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.