JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip pim rp-address

ip pim rp-address

Description: 

Specifies a static PIM group–to–RP mapping. The no version clears the mapping from this interface.

Syntax: 

[ no ] ip pim rp-address ipAddress [ ipAccessList ] [ override ]

• ipAddress—IP address of the router you want to designate as an RP router
• ipAccessList—Name of the IP access list that specifies which multicast groups use this RP
• override—Specifies that this static RP mapping has priority over group-to-RP mappings learned by auto-RP

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.