JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip ospf message-digest-key md5

ip ospf message-digest-key md5

Description: 

Enables OSPF MD5 authentication and configures the MD5 key. The no version deletes an MD5 key.

NOTE: If all the MD5 keys have been deleted, the authentication type is still MD5, but you must configure MD5 keys. NOTE: To disable MD5 authentication for the interface, use the ip ospf authentication-none command. NOTE: To display the password only in encrypted text, use the service password-encryption command.

Syntax: 

ip ospf message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey

no ip ospf message-digest-key keyID

• keyID—Key identifier in the range 1–255
• md5—Specifies use of the MD5 algorithm
• 0—Indicates the msgDigestKey is entered in unencrypted form (plaintext); this is the default option
• 8—Indicates the msgDigestKey is entered in encrypted form (ciphertext)
• msgDigestKey—OSPF password; string of up to 16 alphanumeric characters

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.