JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip ospf dead-interval

ip ospf dead-interval

Description: 

Sets the time period during which the router's neighbors do not see hello packets before they declare the router to be down. The no version resets the dead interval to its default.

Syntax: 

ip ospf dead-interval deadInterval

no ip ospf dead-interval

• deadInterval—Number in the range 0–2147483647 seconds; default value is 40 seconds

Mode(s): 

Interface Configuration, Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.