JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip nat outside source static

ip nat outside source static

Description: 

Translates the source address when routing a packet from the outside network to the inside network, and "untranslates" the destination address when a packet travels from the inside network to the outside network. The no version removes the static translation and purges the associated translations from the translation table.

Syntax: 

[ no ] ip nat outside source static globalIpAddress localIpAddress

[ no ] ip nat outside source static { tcp | udp } globalIpAddress globalPort localIpAddress localPort

• tcp—Indicates a TCP port
• udp—Indicates a UDP port
• globalIpAddress—Inside global address
• globalPort—Inside global TCP or UDP port
• localIpAddress—Inside local address
• localPort—Inside local TCP or UDP port

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.