JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip mirror

ip mirror

Description: 

Configures the specified interface to mirror all IP ingress and egress traffic, and directs the mirrored traffic to an analyzer interface. The no version disables mirroring on the interface.

NOTE: This command is deprecated and might be removed completely in a future release. The function provided by this command has been replaced by the updated packet mirroring feature and the ip policy command used with the secure-input and secure-output keywords.

Syntax: 

ip mirror mirrorInterfaceType mirrorInterfaceSpecifier
[ analyzerInterfaceType analyzerInterfaceSpecifier [ next-hop nextHop ] ]

no ip mirror mirrorInterfaceType mirrorInterfaceSpecifier

• mirrorInterfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• mirrorInterfaceSpecifier—Particular interface that performs the interface mirroring function; see Interface Types and Specifiers in About This Guide
• analyzerInterfaceType—Interface type
• analyzerInterfaceSpecifier—Particular interface used as the analyzer interface; if omitted, the virtual router's default analyzer interface is used
• nextHop—Next-hop IP address to the remote analyzer host; required if the analyzer interface is a shared medium, such as Ethernet

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Configuring CLI-Based Mirroring