JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip local pool

ip local pool

Description: 

Specifies the pool name, the starting address, the ending address, group name, the utilization threshold, and the SNMP trap flag. The no version deletes a local pool.

Syntax: 

[ no ] ip local pool name [ startIpAddress [ endIpAddress ] ]
[ warning highUtilization abatedUtilization ] [ snmpTrap ]

• name—Text string in the range 1–16 characters that defines the name of the local address pool
• startIpAddress—Starting IP address in the local address pool
• endIpAddress—Ending IP address in the local address pool
• warning—Specifies one of the following utilization warnings:

• highUtilization—High utilization value; a number in the range 1–100; default value is 85
• abatedUtilization—Abated utilization value; a number in the range 1–100; default value is 75

• snmpTrap—Enables SNMP pool utilization traps

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.