JUNOSe 9.1.x Command Reference Guide A to M > I Commands > include circuit-identifier

include circuit-identifier

Description: 

Specifies that the circuit identifier is included when the router automatically generates a username for an IP service profile. The no version disables inclusion of the circuit identifier.

Syntax: 

include circuit-identifier circuitType [ prepend-circuit-type ]

no include circuit-identifier

• circuitType—Type of circuit; atm or vlan
• prepend-circuit-type—Specifies that the circuit type is included in the username

Mode(s): 

IP Service Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.