JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip inspect name

ip inspect name

Description: 

Creates and defines an inspection list. The no version deletes the inspection list.

Syntax: 

ip inspect name inspectName
{ dns | ftp | http | https | icmp | pop-2 | pop-3 | rtsp | smtp | ssh | tcp | telnet | udp }
[ alert { on | off } ] [ audit-trail { on | off } ] [ timeout timeoutValue ]

no ip inspect name inspectName
[ dns | ftp | http | https | icmp | pop-2 | pop-3 | rtsp | smtp | ssh | tcp | telnet | udp ]
[ alert [ on | off ] ] [ audit-trail [ on | off ] ] [ timeout [ timeoutValue ] ]

• inspectName—Name of the inspection list
• dns—Configures the Domain Name Server application in the inspection list
• ftp—Configures File Transfer Protocol in the inspection list
• http—Configures Hypertext Transfer Protocol in the inspection list
• https—Configures Hypertext Transfer Protocol-Secure in the inspection list
• icmp—Configures Internet Control Message Protocol in the inspection list
• pop-2—Configures Post Office Protocol-2 in the inspection list
• pop-3—Configures Post Office Protocol-3 in the inspection list
• rtsp—Configures Real-Time Streaming Protocol and realAudio in the inspection list
• smtp—Configures Simple Mail Transfer Protocol in the inspection list
• ssh—Configures the Secure Shell application in the inspection list
• tcp—Configures Transfer Control Protocol in the inspection list
• telnet—Configures the Telnet application in the inspection list
• udp—Configures User Datagram Protocol in the inspection list
• alert—Overrides the alert log setting on the virtual router
• audit-trail—Overrides the audit trail log setting on the virtual router
• timeoutValue—Specifies a timeout value that overrides the idle timeout for the specified application; range is 5–43200; default value is 3600

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.