JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip igmp querier

ip igmp querier

Description: 

Specifies that the interface will act as a querier when you configure IGMPv1 on an interface; this is the default behavior. The no version specifies that this interface will not issue query packets.

NOTE: This command is valid only for interfaces on configured with IGMPv1.

Syntax: 

[ no ] ip igmp querier

Mode(s): 

Interface Configuration, Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.