JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip igmp promiscuous

ip igmp promiscuous

Description: 

Enables the specified interface to accept IGMP reports from hosts on any subnet. The no version specifies that an IGMP interface should use the Router Configuration mode setting (see the igmp promiscuous command) to determine from which subnets it can accept IGMP reports.

Syntax: 

ip igmp promiscuous { on | off }

no ip igmp promiscuous

• on—Enables the interface to accept IGMP reports from hosts on any subnet
• off—Allows the interface to accept IGMP reports only from hosts on subnets associated with this interface

Mode(s): 

Interface Configuration, Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.