JUNOSe 9.1.x Command Reference Guide A to M > I Commands > ip igmp last-member-query-interval

ip igmp last-member-query-interval

Description: 

Specifies in tenths of a second the maximum time the router waits for a response after sending a last member query. The router sends a last member query when it receives an IGMPv2 leave message or an IGMPv3 state change report. The no version restores the default value, 10 tenths of a second (1 second).

Syntax: 

ip igmp last-member-query-interval tenthsOfaSecond

no ip igmp last-member-query-interval

• tenthsOfaSecond—Time interval between receipt of an IGMP leave message and sending out of a query in the range 1–254 tenths of a second. Using a lower value allows members to leave groups more quickly.

Mode(s): 

Interface Configuration, Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.