JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay lmi-t391dte

frame-relay lmi-t391dte

Description: 

Sets the link integrity verification polling timer (T391) on a DTE interface. The no version removes the current setting and sets the default.

Syntax: 

frame-relay lmi-t391dte seconds

no frame-relay lmi-t391dte

• seconds—Number in the range 5–30 seconds; specifies the interval in seconds between status inquiries issued by the DTE; default value is 10 seconds

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.