JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay lmi-n393dce

frame-relay lmi-n393dce

Description: 

Sets the monitored events count (N393) on a DCE interface. The no version removes current setting and sets the default.

Syntax: 

frame-relay lmi-n393dce events

no frame-relay lmi-n393dce

• events—Number in the range 1–10 events; specifies the diagnostic window used to verify link integrity; default value is 2 events (The detection of N392 errors within the window of N393 samples places the interface in an operationally down state.)

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.