JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay lmi-n392dte

frame-relay lmi-n392dte

Description: 

Sets the error threshold counter (N392) on a DTE interface. The no version removes current setting and sets the default.

Syntax: 

frame-relay lmi-n392dte threshold

no frame-relay lmi-n392dte

• threshold—Positive number in the range 1–10; number of errors that will place the interface in an operationally down state; default value is 3 errors

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.