JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay lmi-n391dte

frame-relay lmi-n391dte

Description: 

Sets the full-status polling counter (N391) on a DTE interface. The no version restores the default value, assuming an LMI has been configured.

Syntax: 

frame-relay lmi-n391dte keepExchanges

no frame-relay lmi-n391dte

• keepExchanges—Number in the range 1– 255; default value is 6; number of keep exchanges to be done before requesting a full-status message. If you specify a value of 1, you receive full-status messages only.

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.