JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > frame-relay keepalive

frame-relay keepalive

Description: 

Enables the LMI mechanism for serial lines using Frame Relay encapsulation. The no version disables this capability. The keepalive command is similar to the frame-relay lmi-t391dte command.

Syntax: 

frame-relay keepalive [ seconds ]

no frame-relay keepalive

• seconds—Number in the range 5–30; default value is 10 seconds; defines the keepalive interval; the interval must be set, and the value on the DTE should be less than the value set on the DCE

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.