failover-resync
Configures the L2TP peer resynchronization method that an L2TP failed endpoint uses to resynchronize with its peer non-failed endpoint. This command configures peer resynchronization for a host profile or a domain map tunnel, and overrides a global peer resynchronization method that is specified in Global Configuration mode. The no version restores the default setting, not-configured.
failover-resync { failover-protocol | failover-protocol-fallback-to-silent-failover |
silent-failover | disable | not-configured }
- failover-protocol—Specifies the L2TP failover protocol method
- failover-protocol-fallback-to-silent-failover—Specifies the L2TP failover protocol method; however, if the peer does not support this method, the silent failover method is used
- silent-failover—Specifies the silent failover method
- disable—Disables peer resynchronization
- not-configured—Specifies that peer resynchronization is not configured for L2TP host profiles and AAA domain map tunnels. L2TP uses the global failover method; the default setting
Domain Map Tunnel Configuration, L2TP Destination Profile Host Configuration
Release Information Command introduced in JUNOSe Release 7.3.0.