JUNOSe 9.1.x Command Reference Guide A to M > E-F-G-H Commands > equipment loopback

equipment loopback

Description: 

Enables or disables the router's ability to be placed in loopback by a remote device connected on a CT3 or T3 interface. The no version disables the router's ability to be placed in loopback by the remote device.

Syntax: 

equipment { customer | network } loopback

no equipment

• customer—Enables the router to enter into loopback when it receives an appropriate signal from the remote interface
• network—Disables the router's ability to enter into loopback when it receives an appropriate signal from the remote interface

Mode(s): 

Controller Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.