JUNOSe 9.1.x Command Reference Guide A to M > D Commands > dsu mode

dsu mode

Description: 

Sets the DSU mode for the lines. The no version clears the dsu mode. If you issue this command, be sure to issue the dsu bandwidth and scramble commands. Similarly, if you issue the no version, be sure to issue the no dsu bandwidth and no scramble commands; otherwise, the interface may drop packets unexpectedly.

Syntax: 

dsu mode { 0 | 2 }

no dsu mode

• 0—Sets digital Link mode
• 2—Sets Larscom mode

Mode(s): 

Controller Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.