JUNOSe 9.1.x Command Reference Guide A to M > D Commands > dsu bandwidth

dsu bandwidth

Description: 

Sets the speed for the fractional T3 lines. The no version clears the bandwidth. If you issue this command, be sure to issue the dsu mode and scramble commands. Similarly, if you issue the no version, be sure to issue the no dsu mode and no scramble commands; otherwise, the interface may drop packets unexpectedly.

Syntax: 

dsu bandwidth bandwidthValue

no dsu bandwidth

• bandwidthValue—Value of the fractional bandwidth in the range 22–44210 Kbps. The router offers a set of speeds in increments that depend on the DSU mode you specify. The actual speed of the fractional T3 lines will be the value closest to the fractional bandwidth you specify.

Mode(s): 

Controller Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.