JUNOSe 9.1.x Command Reference Guide A to M > D Commands > domain-id

domain-id

Description: 

Sets the OSPF domain ID for an OSPF VRF on a PE. The no version restores the default value.

Syntax: 

domain-id domainIdAddress | domainId

no domain-id

• domainIdAddress—OSPF domain ID in IP address format; default value is the IP address of the OSPF router configured in the VRF
• domainId—OSPF domain ID as an integer value in the range 0–4294967295; default value is 0

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.