JUNOSe 9.1.x Command Reference Guide A to M > D Commands > distance

distance

Description: 

Defines an administrative distance for RIP or OSPF routes. A distance of 255 prevents the route from being installed in the routing table. The no version either negates a command or restores the command's defaults.

Syntax: 

The options available vary depending on your routing protocol context; that is, on whether you are configuring OSPF or RIP.

For OSPF:

[ no ] distance { weight | ospf { external distExt | inter-area disInter | intra-area disIntra } [ external distExt | inter-area distInter | intra-area distIntra ]* }

• distance—Weight applied to OSPF routes
• weight—Value assigned to OSPF routes that are added to the IP routing table; a number in the range 1–255
• ospf—OSPF routes
• distExt—Distance for external type 5 and type 7 routes; a number in the range 1–255
• disInter—Distance for interarea routes; a number in the range 1–255
• disIntra—Distance for intra-area routes; a number in the range 1–255
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line

For RIP:

[ no ] distance weight

• weight—Administrative distance assigned to RIP routes added to the IP routing table in the range 0–255; default value is 120

Mode(s): 

Address Family Configuration (RIP), Router Configuration (OSPF or RIP)

    Release Information    Command introduced before JUNOSe Release 7.1.0.