JUNOSe 9.1.x Command Reference Guide A to M > D Commands > diag

diag

Description: 

Reboots the SRP module or line module in the specified slot on all E-series routers and performs diagnostic tests. There is no no version.

Syntax: 

diag slotNumber [ subsystem ] [ force ]

• slotNumber—Number of the chassis slot that contains the SRP module or line module
• subsystem—Type of subsystem on the E120 router or the E320 router; use when the specified slotNumber is a slot that contains an SRP module

• srp—Indicates the system controller (SC) on one or both SRP modules; specify this keyword to restart only the portion of the SC on the individual SRP module
• fabric—Indicates the portion of the switch fabric on the SRP modules; specify this keyword to restart only an individual fabric slice

• force—Specifies that the system manually confirm conflicting conditions when the slot of the active SRP module is specified

Mode(s): 

Privileged Exec

    Release Information    Command introduced in JUNOSe Release 7.3.0.