JUNOSe 9.1.x Command Reference Guide A to M > C Commands > configure

configure

Description: 

Enters Global Configuration mode. There is no no version.

NOTE: This command is not allowed for a short time after a warm restart (warm switchover) occurs. This behavior allows some applications time to complete their warm-restart initialization. However, if the warm-restart does not complete in 5 minutes, the warm-start is cancelled and configuration access is restored.

Syntax: 

configure [ terminal | file [ fileName ] [ verbose | show-progress [ dotPeriod ] ] ]

• terminal—Enables manual configuration from a terminal
• file—Configures the router from a script file
• fileName—Script file to execute
• verbose—Echoes each command as the script is executed
• show-progress—Displays a '.' during script execution
• dotPeriod—Number of commands executed before a '.' is displayed; default value is 100

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.