JUNOSe 9.1.x Command Reference Guide A to M > C Commands > committed-action

committed-action

Description: 

Sets the action for packets conforming to the committed rate and committed burst size and conforming to the exceed rate and exceed burst size for a rate-limit profile. The no version restores the value to the default value, drop.

Syntax: 

For IP and IPv6 rate-limit profiles:

[ no ] committed-action { drop | transmit | mark markVal }

For L2TP rate-limit profiles:

[ no ] committed-action { drop | transmit }

For MPLS rate-limit profiles:

[ no ] committed-action { drop | transmit | mark-exp expValue }

For hierarchical rate-limit profiles:

[ no ] committed-action { drop | transmit [ conditional | unconditional | final ] }

• drop—Drops the packet
• transmit—Transmits the packet; for hierarchical rate limits:

• conditional—Packets must pass the next rate limit
• unconditional—Packets take resources, but are not affected by the rest of the hierarchy
• final—Packets exit the hierarchy at rate limit

• markVal—Value in the range 0–255
• expValue—EXP bit value in the range 0–7

Mode(s): 

Rate Limit Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
conditional, unconditional, and final keywords added in JUNOSe Release 7.2.0.

    Related Topics    

• Creating a Two-Rate Rate-Limit Profile