JUNOSe 9.1.x Command Reference Guide A to M > C Commands > clear mpls ldp

clear mpls ldp

Description: 

Removes and reestablishes existing LDP LSPs, thereby forcing the reapplication of policies on the reestablished topology-driven LDP LSPs. You can clear all LDP LSPs or limit the clearance to only LSPs to a specified prefix or neighbor. There is no no version.

Syntax: 

clear mpls ldp [ prefix destAddr [ maskLen | mask ] | neighbor [ neighborAddress ] ]

• destAddr—IP address of the prefix to be cleared
• maskLen—Length of the prefix to be cleared; number in the range 0–32
• mask—Mask for the prefix to be cleared
• neighborAddress—IP address of a neighbor 32-bit dotted-decimal format of the entry to be cleared

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.