JUNOSe 9.1.x Command Reference Guide A to M > C Commands > clear ipv6 tunnel-routes

clear ipv6 tunnel-routes

Description: 

Clears and then refreshes IPv6 routes from the tunnel routing table. To clear the routes for a specific IPv6 network, specify the IPv6 prefix. To clear all dynamic IPv6 routes, use the * (asterisk) option. There is no no version.

Syntax: 

clear ipv6 tunnel-routes [ ipv6Prefix | * ]

• ipv6Prefix—IPv6 network for which to clear route information
• *—Clears all dynamic IPv6 routes

Mode(s): 

Privileged Exec

    Release Information    Command introduced in JUNOSe Release 7.1.0.