JUNOSe 9.1.x Command Reference Guide A to M > C Commands > clear ip pim remote-neighbor count

clear ip pim remote-neighbor count

Description: 

Clears the counters for remote neighbor statistics on all interfaces or the specified interface. There is no no version.

NOTE: This command is typically used when you configure PIM remote neighbors to run multicast services over BGP/MPLS VPNs. That functionality is no longer supported.

Syntax: 

clear ip pim remote-neighbor [ ipAddress ] count

• ipAddress—IP address of the interface

Mode(s): 

Privileged Exec, User Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.