JUNOSe 9.1.x Command Reference Guide A to M > C Commands > clear ip ospf neighbor

clear ip ospf neighbor

Description: 

Clears or resets adjacency with a specified neighbor session. There is no no version.

NOTE: When OSPF is configured and running over an NBMA network, do not issue the clear ip ospf neighbor command simultaneously on both ends of the OSPF link. Doing so brings the OSPF link down completely. In this event, you must do one of the following on both sides of the link to bring the link back up: Reconfigure the OSPF neighbors on the NBMA interface with the neighbor command. Issue the clear ip ospf database command to clear and reset the OSPF adjacencies. Issue the shutdown command followed by the no shutdown command on the interface.

Syntax: 

clear ip ospf neighbor [ neighborAddress ]

• neighborAddress—IP address of identified neighbor to clear or reset

Mode(s): 

Privileged Exec

    Release Information    Command introduced in JUNOSe Release 7.1.0.