JUNOSe 9.1.x Command Reference Guide A to M > C Commands > clear bridge interface

clear bridge interface

Description: 

Removes from the forwarding table all dynamic (learned) MAC address entries for a specified network interface that belongs to a bridge group or to a VPLS instance . There is no no version.

NOTE: Using the clear bridge interface command for a VPLS instance affects the specified network interface associated with the VPLS instance, but has no effect on the VPLS virtual core interface, which represents all of the MPLS tunnels from the router to the remote VPLS edge (VE) devices. To remove all MAC addresses from the forwarding table for the VPLS virtual core interface, use the clear bridge interface vpls command.

Syntax: 

clear bridge interface interfaceType interfaceSpecifier

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide:

• atm
• fastEthernet
• gigabitEthernet
• tenGigabitEthernet

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Clearing Dynamic MAC Addresses from the VPLS Forwarding Table