JUNOSe 9.1.x Command Reference Guide A to M > C Commands > clear bridge address

clear bridge address

Description: 

Removes a specific dynamic (learned) MAC address entry from the forwarding table for the specified bridge group or VPLS instance. There is no no version.

Syntax: 

clear bridge { bridgeGroupName | vplsName } address macAddress

• bridgeGroupName—Name of a bridge group specified with the bridge command
• vplsName—Name of a VPLS instance created with the bridge vpls transport-virtual-router command
• macAddress—Unique 48-bit (6-byte) number that is programmed into each LAN network interface card (NIC) at the time of manufacture; also known as a hardware address or physical address. The MAC address format is a dotted triple of four-digit hexadecimal numbers; for example, 0090.1a40.4c7c

Mode(s): 

Privileged Exec

    Release Information    Command introduced in JUNOSe Release 7.1.0.
vplsName variable added in JUNOSe Release 7.1.0.

    Related Topics    

• Clearing Dynamic MAC Addresses from the VPLS Forwarding Table