JUNOSe 9.1.x Command Reference Guide A to M > C Commands > cost

cost

Description: 

Specifies a cost metric for an OSPF remote-neighbor interface. Used in the calculation of the SPF routing table. The no version restores the default value.

Syntax: 

cost intfCost

no cost

• intfCost—Link-state metric cost; a number in the range 1–65535; default value is 10 if there is no route to the remote neighbor; otherwise, the default is calculated based on the bandwidth of the physical interface used to reach the remote neighbor and the OSPF auto-cost reference bandwidth

Mode(s): 

Remote Neighbor Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.