JUNOSe 9.1.x Command Reference Guide A to M > C Commands > controlled-interface-type

controlled-interface-type

Description: 

Assigns controlled-interface types to a QoS parameter definition. Controlled-interface types specify the types of logical interfaces whose queues and nodes can be controlled by instances of the parameter definition. You can specify up to four controlled-interface types for each parameter definition. The no version removes the controlled-interface type from the parameter definition.

Syntax: 

controlled-interface-type controlledInterfaceType

no controlled-interface-type { controlledInterfaceType | all }

• controlledInterfaceType—One of the following controlled-interface types: atm, atm-vc, atm-vp, bridge, ethernet, fr-vc, ip, ip-tunnel, ipv6, l2tp-session, l2tp-tunnel, lsp, serial, svlan, server-port, vlan
• all—Removes all controlled-interface types

Mode(s): 

QoS Parameter Definition

    Release Information    Command introduced in JUNOSe Release 7.1.0.

    Related Topics    

• Configuring a Basic Parameter Definition for QoS Administrators