JUNOSe 9.1.x Command Reference Guide A to M > B Commands > bgp cluster-id

bgp cluster-id

Description: 

Configures a cluster ID if the BGP cluster has more than one route reflector. The no version causes BGP to use the router ID as the cluster ID.

Syntax: 

bgp cluster-id { clusterId | ipAddress }

no bgp cluster-id [ clusterId | ipAddress ]

• clusterId—Number in the range 0–4294967295; the cluster ID of this router acting as a route reflector
• ipAddress—Cluster ID of this router acting as a route reflector specified as an IP address

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.