JUNOSe 9.1.x Command Reference Guide A to M > B Commands > bgp advertise-inactive

bgp advertise-inactive

Description: 

Enables the advertisement of inactive BGP received routes—routes that are considered by BGP to be "best routes" and therefore are present in the IP forwarding table, but that are not being used for forwarding. The no version restores the default state of normal route advertisement, whereby BGP advertises received routes only if they are in the IP forwarding table and are being used to forward traffic, or if synchronization is enabled.

Syntax: 

[ no ] bgp advertise-inactive

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.