JUNOSe 9.1.x Command Reference Guide A to M > B Commands > baseline pppoe interface

baseline pppoe interface

Description: 

Sets a statistics baseline for PPPoE interfaces, subinterfaces, and/or circuits. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved. There is no no version.

Syntax: 

baseline pppoe interface interfaceType interfaceSpecifier

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide:

• atm
• fastEthernet
• gigabitEthernet
• lag
• serial—PPPoE is not currently supported on serial interfaces
• tenGigabitEthernet

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.