JUNOSe 9.1.x Command Reference Guide A to M > B Commands > baseline frame-relay interface

baseline frame-relay interface

Description: 

Sets a statistics baseline for Frame Relay and MLFR interfaces, subinterfaces, and circuits. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved. There is no no version.

Syntax: 

baseline frame-relay interface interfaceType interfaceSpecifier [ dlci ]

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide:

• mlframe-relay
• pos
• serial
• tunnel

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• dlci—DLCI number to be used on the specified subinterface to identify a virtual circuit in the range 16–1007

Mode(s): 

Privileged Exec

    Release Information    Command introduced before JUNOSe Release 7.1.0.