JUNOSe 9.1.x Command Reference Guide A to M > B Commands > bulkstats traps

bulkstats traps

Description: 

Configures the bulkstats traps. The no version disables the trap.

Syntax: 

bulkstats traps { nearly-full [ threshold ] | full }

no bulkstats traps { nearly-full | full }

• nearly-full—Specifies a percentage less than 100 percent
• threshold—Percentage less than 100 percent; if not specified, defaults to 99 percent
• full—100 percent

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.