JUNOSe 9.1.x Command Reference Guide A to M > B Commands > bulkstats interface-type

bulkstats interface-type

Description: 

Configures the interface type on which you want to collect statistics. The no version deletes the interface type from bulkstats collection.

Syntax: 

[ no ] bulkstats interface-type interfaceType [ interfaceSpecifier ]*
[ collector collectorIndex ]

• interfaceType—One of the following interface types for which you can collect statistics: ATM, ATM 1483, Ethernet, Frame Relay, Frame Relay subinterface, Cisco HDLC, IP, MPLS minor, MPLS major, MPLS shim, PPP, VLAN subinterface
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• *—Indicates that one or more parameters can be repeated multiple times in a list in the command line
• collectorIndex—Number in the range 1–65535 that identifies the particular data collector. Always specify this option if you defined more than one collector.

Mode(s): 

Global Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.
mplsL2shim, mplsMajor, and mplsMinor keywords added in JUNOSe Release 8.2.0.