JUNOSe 9.1.x Command Reference Guide A to M > A Commands > address send version

address send version

Description: 

Restricts the RIP version that the router can send on an interface. The no version sets the interface back to the default value, sending only RIP version 1.

Syntax: 

address { ipAddress | unnumbered interfaceType interfaceSpecifier }
send version { 1 | 2 | 1 2 | 2 1 | off }

no address [ ipAddress | unnumbered interfaceType interfaceSpecifier ] send version

• ipAddress—Address of IP interface where RIP will be run
• unnumbered—Specifies that RIP will be run on an unnumbered interface

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

• 1—Specifies RIP version 1 only
• 2—Specifies RIP version 2 only
• 1 2—Specifies RIP version 1 and version 2
• 2 1—Specifies RIP version 2 and version 1
• off—Turns reception off

Mode(s): 

Address Family Configuration, Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.