JUNOSe 9.1.x Command Reference Guide A to M > A Commands > address network

address network

Description: 

Configures the OSPF network type for the specified interface to something other than the default for the network medium. The no version restores the default value for the medium.

NOTE: You must issue the address area command before issuing this command.

Syntax: 

address { ipAddress | unnumbered interfaceType interfaceSpecifier }
network { broadcast | non-broadcast | point-to-point }

no address { ipAddress | unnumbered interfaceType interfaceSpecifier } network

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

• broadcast—Sets network type to broadcast
• non-broadcast—Sets network type to NBMA
• point-to-point—Sets network type to point-to-point

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.