JUNOSe 9.1.x Command Reference Guide A to M > A Commands > address authentication-none

address authentication-none

Description: 

Specifies that no authentication is to be used for the OSPF interface. The no version has no effect.

NOTE: You must issue the address area command before issuing this command.

Syntax: 

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } authentication-none

• ipAddress—OSPF interface address previously specified with the address command
• unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.