JUNOSe 9.1.x Command Reference Guide A to M > A Commands > atm oam flush

atm oam flush

Description: 

Configures the router to ignore all OAM cells received on an ATM interface, and to stop sending OAM cells on this interface. OAM performs fault management and performance management functions on an ATM interface. The no version disables OAM flush on the interface.

Syntax: 

[ no ] atm oam flush [ alarm-cells ]

• alarm-cells—Causes the router to ignore only AIS and RDI cells and to accept all other OAM cells

Mode(s): 

Interface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.