atm cell-packing
Configures cell concatenation parameters for an ATM 1483 subinterface that provides ATM layer 2 services over MPLS with virtual channel connection (VCC) cell relay encapsulation. The no version restores the default cell concatenation parameters for the subinterface.
 |
NOTE: See the atm mcpt-timers command for information about configuring systemwide values for the three ATM Martini cell packing timers to define the cell collection time threshold. |
atm cell-packing maxCellsPerPacket mcpt-timer timerIdentifier
- maxCellsPerPacket—Maximum number of ATM cells in the range 1–190 that the router can concatenate in a single VCC cell relay–encapsulated packet and transmit on an MPLS pseudowire connection; default value is 1 cell per packet
- timerIdentifier—Integer in the range 1–3 that identifies which of the three ATM Martini cell packing timers (timer 1, timer 2, or timer 3) you want to use to detect timeout of the cell collection time threshold; default value is 1. When the timer expires, the router forwards the packet even if the number of concatenated ATM cells in the packet is fewer than the specified maximum number of cells per packet.
Subinterface Configuration
Release Information Command introduced before JUNOSe Release 7.1.0.