JUNOSe 9.1.x Command Reference Guide A to M > A Commands > atm atm1483 subscriber

atm atm1483 subscriber

Description: 

Configures a local subscriber (when one cannot be obtained externally, as in PPP) for a dynamic upper interface encapsulation type configured over a dynamic ATM 1483 subinterface. A subscriber supports authentication and configuration from the RADIUS server. The no version removes the subscriber.

Syntax: 

atm atm1483 subscriber upperInterfaceType { user | user-prefix } userName
domain domainName [ { password | password-prefix } password ] [ no-authenticate ]

no atm atm1483 subscriber upperInterfaceType

• upperInterfaceType—One of the following dynamic encapsulation types:

• bridgedEthernet
• ip

• user—Employs the username as specified
• user-prefix—Appends the interface physical location to the username
• userName—RADIUS username
• domainName—Domain name
• password—Employs the password as specified
• password-prefix—Appends the interface physical location to the password
• password—RADIUS password
• no-authenticate—Disables authentication

Mode(s): 

Profile Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.