[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

JUNOSe 9.1.x Command Reference Guide A to M > A Commands > atm atm1483 snmp trap link-status

atm atm1483 snmp trap link-status

Description: 

Enables SNMP link status traps on the ATM1483 layer. The no version disables the traps.

Syntax: 

[ no ] atm atm1483 snmp trap link-status

Mode(s): 

Subinterface Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]