JUNOSe 9.1.x Command Reference Guide A to M > A Commands > area virtual-link authentication message-digest

area virtual-link authentication message-digest

Description: 

Specifies that MD5 authentication is used for the virtual link. The no version sets the authentication for the virtual link to none, but leaves any configured MD5 key intact.

Syntax: 

[ no ] area { areaID | areaIdInt } virtual-link ipAddress authentication message-digest

• areaId—OSPF area ID in IP address format
• areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
• ipAddress—IP address of the virtual link neighbor

Mode(s): 

Router Configuration

    Release Information    Command introduced before JUNOSe Release 7.1.0.