JUNOSe 9.1.x System Event Logging Reference Guide > Event Categories > pimIpv6HelloRcvdLog

pimIpv6HelloRcvdLog

Description: 

Protocol Independent Multicast (PIM) hello messages received

Emergency: 

None

Alert: 

None

Critical: 

None

Error: 

None

Warning: 

None

Notice: 

None

Info: 

Short description of the received PIM hello messages

Debug: 

Complete printout of the received PIM hello messages

Filter: 

interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ]

• interface-ipv6-address—Logs events for a specific interface
• ipv6-address—Specifies that you will identify the interface by entering an IPv6 address
• ipv6Address—IPv6 address of interface for which you want to log events
• unnumbered—Specifies that the interface is unnumbered
• interfaceType—Type of interface for which you want to log events
• interfaceSpecifier—Location of unnumbered interface in the appropriate format
  

  NOTE: For information about interface types and specifiers, see JUNOSe Command Reference Guide, About This Guide.

  
  

Filter: 

router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ] ]

• router—Logs events for a specific virtual router
• virtualRouterName—Name of virtual router for which you want to log events
• interface-ipv6-address—Logs events for a specific interface on the virtual router
• ipv6-address—Specifies that you will identify the interface by entering an IPv6 address
• ipv6Address —IPv6 address of interface for which you want to log events
• unnumbered—Specifies that the interface is unnumbered
• interfaceType—Type of interface for which you want to log events
• interfaceSpecifier—Location of unnumbered interface in the appropriate format
  

  NOTE: For information about interface types and specifiers, see JUNOSe Command Reference Guide, About This Guide.